Viewing Mac Address Table; Mac Address Table Configuration Example - Zte ZXR10 5900E Series User Manual

ZXR10 5900E Series User Manual (Ethernet Switching Volume)
Command
show mac [dynamic|static|permanent|
ZXR10(config)#
src-filter|dst-filter|<mac-address>| interface
<port-name>|vlan <vlan-id>]
Example
Equipment
PC1
PC2
PC3
ZXR10 2826E
34 Confidential and Proprietary Information of ZTE CORPORATION
There is no need to specify a port name while setting MAC address
filtering. This function filters data frames from all ports of the
switch. To cancel MAC address filtering, simply delete the MAC
address.

Viewing MAC Address Table

View MAC address entry by using the following command. The
viewed MAC address are dynamic learning and added manually.
Example: display MAC address entry.
ZXR10(config)#show mac
Total MAC address : 2
Flags: vid --VLAN id,stc --static, per --permanent, toS
--to-static,wtd--is wri
ted,
srF --source filter,dsF --destination filter, time
--day:hour:min:sec
Frm --mac from where:0,drv; 1,config; 2,VPN; 3,802.1X;
4,micro;5,dhcp
MAC_Address vid
Frm Time
--------------------------------------------------------------
0000.2222.2222 2
1 0:00:14:19
0000.1111.1111 2
1 0:00:14:28
MAC Address Table
Configuration Example
As shown in Figure
link smartgroup1, three PCs and a ZXR10 2826E are connected to
switch B. The details is shown as .
MAC Address
0X00D0.8765.95CA
0X00D0.8765.95CB
0X00D0.8765.95CC
----------
Function
This views MAC address table.
vpn port per stc toS wtd srF dsF
0 fei_2/1/2 1
0 fei_2/1/2 1
6, switches A and B are connected over trunk
Switch Port
gei_1/1
gei_1/3
gei_1/5
gei_1/7
0 0 0 0 0
0 0 0 0 0
VLAN
1
2
3
4