Show Mpls Traffic-Eng Autoroute; Show Mpls Traffic-Eng Ds-Te Exp-Map - Zte ZXR10 Command Manual

ZXR10 Command Manual (MPLS Volume)
Purpose
Command Modes
Syntax
Instructions
Example
Purpose
Command Modes
Syntax
Instructions
88 Confidential and Proprietary Information of ZTE CORPORATION
Field
RSVP signalling
refresh interval
RSVP signalling
refresh misses
show mpls traffic-eng
autoroute
Use this command to show the status and configuration informa-
tion of all tunnels with automatic routes.
All modes except user EXEC

show mpls traffic-eng autoroute

This command is supported after the platform version 4.8.20.
The following contents will be shown after using this command.
(The data below is for reference only):
ZXR10# show mpls traffic-eng autoroute
MPLS TE autorouting enabled
destination 1.1.1.25 has 1 tunnels
TunnelId DestRouterId
NextHop MetricType
1 1.1.1.25
The descriptions of the displayed information are shown below.
Field
TunnelId
Destination
State
NextHop
MetricType
MetricValue
show mpls traffic-eng ds-te
exp-map
Use this command to show exp-map mapping relationship.
All modes except user EXEC

show mpls traffic-eng ds-te exp-map

This command is supported after the platform version 4.8.21.
Description
Refreshing time of RSVP protocol signalling
messages
Number of refreshing missing messages of
RSVP protocol signalling messages
TunnelState Destination
MetricValue
UP 10.10.10.2
Description
Tunnel ID
TE RouteID of the tunnel destination
Tunnel state
Next hop address of the tunnel
Metric type
Metric value
State
relative -1