Vpls Apply-Mac-Filter - Zte ZXR10 Command Manual

Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
tablished to exchange MPLS inner labels which identifies VPLS be-
tween two PEs. MPLS inner labels are also named virtual channel
(VC) labels (the pseudo wire (PW) is composed of the VC label
and the MPLS outer label of the LSP). The virtual channel identi-
fier (VCID) configured by this command is used to identify different
VPLS when VC labels are exchanged between PEs.
This example describes how to configure the virtual channel iden-
tifier (VCID) as 100 on the PE.
ZXR10(config)#vfi vfi1
ZXR10(config-vfi)# vcid 100
vfi
pwtype
peer

vpls apply-mac-filter

Use this command to apply MAC filter rule to a virtual forwarding
instance (VFI) on the PE.
VFI configuration
vpls apply-mac-filter <rule_number> global
no vpls apply-mac-filter <rule_number> global
<rule_number>
global
� This command is supported after the platform version 4.8.02.
� Use this command to apply VPLS MAC filtering.
This example describes how to apply MAC filter rule to a virtual
forwarding instance (VFI) member on the PE.
ZXR10(config)#vfi vfi1
ZXR10(config-vfi)#vpls apply-mac-filter 1 global
no vfi
vcid
pwtype
peer
no peer
vpls mac-filter
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 VPLS Configuration
MAC filter rule number
All members of this virtual forwarding
instance (VFI) are valid
65