Vpls Mac-Filter - Zte ZXR10 Command Manual

Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
This example describes how to configure static multi-hop pseudo
wire (PW) forwarding relaying on the PE.
ZXR10(config)#vfi mspw vfi1
ZXR10(config-vfi-mspw)#
no vfi mspw
pwtype
peer
no peer

vpls mac-filter

Use this command to create a VPLS MAC filter rule, including the
entries. Delete the VPLS MAC filter rule with the no form of this
command.
Global configuration
vpls mac-filter-rule <rule_number><single | range><filter_nu
mber><mac-addr><mac-addr>
no vpls mac-filter-rule <rule_number><filter_number>
<rule_number>
<single | range>
<filter_number>
<mac-addr>
� This command is supported after the platform version 4.8.02.
� Use this command to implement VPLS MAC filtering.
This example describes how to configure the VPLS instance name
on the PE.
ZXR10(config)#vpls mac-filter-rule 1
ZXR10(config)#vpls mac-filter-rule 1 single 1 0001.0002.0003
no vfi
vid
pwtype
peer
no peer
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 VPLS Configuration
MAC filter rule number
Filter rule type. single or range
MAC filter entry number
MAC address
67