Ip Rsvp Authentication Window-Size; Ip Rsvp Bandwidth - Zte ZXR10 Command Manual

ZXR10 Command Manual (MPLS Volume)
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
74 Confidential and Proprietary Information of ZTE CORPORATION
md5
sha1
MD5 authentication type is adopted on the interface by default.
�
This command is an optional command.
� This command is supported after the platform version 4.8.21.
This example describes how to configure the RSVP authentication
type as MD5 on the interface.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#ip rsvp authentication type md5
ip rsvp authentication
window-size
Use this command to configure the authentication window size.
Restore the default value with the no form of this command.
Interface configuration
ip rsvp authentication window-size <window-size>
no ip rsvp authentication window-size
<window-size>
The authentication window size is 1 by default.
� This command is an optional command for configuring the
RSVP authentication window size on the interface.
packets are received, the authentication window is used to
save the sequence recently received. If the sequence of the
subsequent packet is new, or it is in the authentication window
but it is never used, it will be received. Otherwise, it will be
refused.
� This command is supported after the platform version 4.8.21.
This example describes how to configure the authentication win-
dow size as 5.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#ip rsvp authentication window－size 5

ip rsvp bandwidth

Use this command to configure the TE bandwidth in interface con-
figuration mode on the interface. Restore default with the no form
of this command.
MD5 authentication type
SHA1 authentication type
Authentication window size, range: 1~64
When