Show Mac-Filter; Show Mac-Table - Zte ZXR10 Command Manual

Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
2. This example describes how to configure the pseudo-wire type
in VFI MSPW configuration mode on the PE.
ZXR10(config)#vfi vfi1
ZXR10(config-vfi-mspw)#pwtype mspw ethernet
vfi
vcid
peer
no peer

show mac-filter

Use this command to show detailed information about the filtering
of some VPLS MAC .
Global configuration
show mac-filter <rule_number>
<rule_number>
This command is supported by ZXR10 T64E/T128.
This example describes how to show detaiedl information about
the filtering of some VPLS MAC .
ZXR10(config)#show mac-filter 1
RuleNo FilterNo
1 1 0001.0002.0003
1 0 0002.0003.0004
1 2 0003.0004.0005
The displayed field descriptions are shown below.
Field
RuleNo
FilterNo
MAC_Bottom
MAC_Top

show mac-table

Use this command to show the MAC table of a VPLS instance.
User EXEC and privileged EXEC
show mac-table <vfi-name>
Confidential and Proprietary Information of ZTE CORPORATION
Rule number for MAC filtering, range: 0~127
MAC_Bottom MAC_Top
0001.0002.0003
0002.0003.0006
0003.0004.0007
Description
Filter rule number
Filter rule entry number
Filter rule entry number
Maximum MAC address to be filtered
Chapter 4 VPLS Configuration
59