Zte ZXR10 Command Manual page 109

Chapter 5 MPLS Traffic Engineering Configuration
No configuration by default.
Defaults
When tunnel is DOWN, set it to UP.
Instructions
This example describes how to set tunnel ingress to 1.1.1.1,
Example
egress to 2.2.2.2, out-label to 17, out-port to gei_1/1, next-hop
to 10.10.10.1.
ZXR10(config)#interface tunnel5
ZXR10(config-if)#tunnel static ingress 1.1.1.1 egress 2.2.2.2
out-port gei_1/1 out-label 17 next-hop 10.10.10.1
Confidential and Proprietary Information of ZTE CORPORATION 101