Show Mpls Ldp Discovery - Zte ZXR10 Command Manual

ZXR10 Command Manual (MPLS Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Example
38 Confidential and Proprietary Information of ZTE CORPORATION
Field
InLable
OutLable
Network
NH
From
Flaps
Duration
Reuse
Penalty

show mpls ldp discovery

Use this command to show information about LDP discovery .
User EXEC and privileged EXEC
show mpls ldp discovery [detail]
detail
This example describes how to show information about LDP dis-
covery .
ZXR10#show mpls ldp discovery
Local LDP Identifier:
95.95.95.95:0
Discovery Sources:
Interfaces:
fei_5/1 (ldp): xmit/recv
LDP Id: 93.93.93.93:0; IP addr: 95.93.5.93
fei_6/1 (ldp): xmit/recv
LDP Id: 98.98.98.98:0; IP addr: 95.98.6.98
The displayed field descriptions are shown below.
Field
Local LDP Identifier
Interface
Xmit
Recv
Description
Ingress label
Egress Label
Network IP address and mask length of LSP
Next hop address
LDP Router identifier of the remote neighbor
Flapping time of current lsp
Time from the first time to drop packets until
now
Time from the last time to receive packets
until now
Penalty value, values of LSP reuse and
suppression are decided by this value
Shows the detailed information of the
discovered neighbor
Description
Local LDP identifier
List of interfaces acting the LDP discovery
Indicates that the interface is sending hello
message
Indicates that the interface is receiving hello
message