Show Ip Explicit-Path - Zte ZXR10 Command Manual

ZXR10 Command Manual (MPLS Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
86 Confidential and Proprietary Information of ZTE CORPORATION
Field
Direction
Expiration
Last valid seq
Challenge
Windowsize
Integriy HFflag
Sequence window

show ip explicit-path

Use this command to show detailed information about the explicit
path.
All modes except user EXEC
show ip explicit-path [name <name>| identifier <identifier>]
name <name>
identifier <identifi
er>
This command is used to show detailed information about the ex-
plicit path. If the router does not support MPLS traffic engineering,
there is no such information displayed.
The following contents will be shown after using this command.
(The data below are for reference only):
ZXR10#show ip explicit-path
PATH namepath_123
1. next-address 192.1.1.1 strict
2. next-address 1.1.1.1 loose
PATH identifier 123
1. next-address 10.40.88.36 strict
2. next-address 3.2.1.6 loose
ZXR10#show ip explicit-path name path_123
PATH namepath_123
1. next-address 192.1.1.1 strict
2. next-address 1.1.1.1 loose
The descriptions of the displayed information are shown below.
Field
PATH
1. next-address
2. next-address
Description
Direction of the SA (send or receive)
Expiration time of the SA
Latest valid sequence
Whether passes the challenge negotiation
SA window size
Whether supports the challenge
Valid sequence group
Path name
Path identifier, range: 1~65535
Description
Name of the path or number of flags
First IP address in the path
Second IP address in the path