Inverting Pan And Tilt - Martin Mania SCX500 User Manual

• Set channels 7 and 8 to 'tracking' if you are using programmed fade
times or macros on your DMX controller.
• Select a speed on channels 7 and 8 if you are not using programmed
fade times or macros on your DMX controller.
The Mania SCX500 is set to 'tracking' by default.
See "DMX protocol" on page 27 for full details of the DMX values you
need to set on each channel to obtain the lighting effects outlined above.
DMX sign al indicator
When the Mania SCX500
receives a valid DMX
signal, the green Data LED
will light to show that the
fixture is receiving control
data.
I n v e r t i n g p a n a n d t i l t
The Mania SCX500's pan and/or tilt can be inverted. This feature lets you
set up symmetrical or mirrored movement of pairs of fixtures.
Inverting pan
To set a Mania SCX500 to inverted pan:
1. Apply power to the fixture and wait for the fixture to reset.
2. Hold the Mode button pressed in. After 5 seconds the display will blink.
You are now in the control menu. Keeping the Mode button pressed in,
press the X100 button repeatedly, until
display.
• If the display blinks
• If the display blinks
3. Keeping the Mode button pressed in, press the X1 button to toggle
between normal and inverted pan.
4. Release the Mode button to save the setting and return the fixture to
normal operation.
20
2 0
2 1
Mania SCX500 user manual
DMX signal received
DMX Address
X100 X10 X1
2
appears in the left of the
, the fixture is in normal pan mode.
, the fixture is in inverted pan mode.
Data LED
lit
Mode