ERVICE AND MAINTENANCE
The Mania SCX500 requires simple routine maintenance. The
maintenance schedule depends heavily on the operating environment;
please consult a Martin service technician for recommendations.
Any service procedure not described here should be referred to a qualified
Disconnect the fixture from power and allow it to cool for at
least 20 minutes before removing any cover.
Important! Excessive dust, grease, and smoke fluid buildup degrades
performance and causes overheating and damage to the
fixture that is not covered by the warranty. Check and, if
necessary, clean fixtures at regular intervals.
L a m p
The Mania SCX500 uses a 15V, 150W halogen lamp with integral reflector
The Philips JCR/H5 (EFR/LL) 15 V, 150 W long-life halogen lamp,
average lamp life 500 hours, color temperature 3100 K, is approved for
use with the Mania SCX500.
Important! Use only an approved lamp. Installing any other lamp type may
damage the fixture.
Replacing the lamp
Wear safety glasses and gloves and allow the fixture to cool
for at least 20 minutes before removing the lamp.
1. Disconnect the fixture from power and allow it to cool for at least 20
Mania SCX500 user manual