Use the automatic document feeder to create an enlarged or reduced document
Use the automatic document feeder to create an enlarged or
reduced document
Introduction
If you want to enlarge or reduce your document, you only need to select one of the
paper sizes that is loaded in the paper trays. An appropriate reduction or enlargement
will be selected automatically.
How to use the automatic document feeder to create an enlarged or reduced
document
Place and align the originals face down in the automatic document feeder
1.
originals in the automatic document feeder' on page
Press the 'Copy' key.
2.
Select '1-sided' or '2-sided' in the 'Original' and 'Copy' boxes.
3.
Select 'Yes' or 'No' in the 'Staple' box.
4.
Press the 'Paper' key.
5.
Select the required paper size in the 'Tray' box.
6.
The enlargement or reduction is calculated automatically and is displayed in the
'Basic settings' name box.
[79]
[79] Select the required paper size
Use the numeric keys to enter the number of sets.
7.
Press the Start key .
8.
(see 'Place
43).
97