Copy an A3/Tabloid 11x17 original from the platen
Introduction
The platen is the location where you place one original that the automatic document
feeder cannot handle. The platen cannot detect the dimensions of your original
'Your originals' on page
platen, you must set the paper size of your original.
When the required copy size is not A3/Tabloid 11x17, you must set the required copy
size and adjust the enlargement or reduction
enlarged or reduced copy' on page
How to copy an A3/Tabloid 11x17 original from the platen
Place the original face down in the left rear corner. Align the short edge of the
1.
original in vertical position on the platen
page
45).
Close the cover of the platen.
2.
Press the 'Copy' key.
3.
Select '1-sided' in the 'Original' and 'Copy' boxes.
4.
Select 'No' in the 'Staple' box.
5.
Press the 'Paper' key.
6.
Select the A3/Tabloid 11x17 paper size in the 'Tray' box.
7.
[83]
[83] Select A3/Tabloid 11x17
Use the numeric keys to enter the number of copies.
8.
Press the Start key .
9.
Do not forget to remove the original from the platen.
10.
Copy an A3/Tabloid 11x17 original from the platen
40). When you copy an A3/Tabloid 11x17 original from the
(see 'Use the platen to create an
103).
(see 'Place an original on the platen' on
(see
101