Using The Automatic Document Feeder To Copy; Simple Copying - Océ VarioPrint 1055 User Manual

Using the automatic document feeder to
copy

Simple copying

Introduction
Use the automatic document feeder to copy your documents in a simple and quick
way. When you insert the originals, the automatic document feeder detects their
dimensions. If a matching paper size is loaded in one of the paper trays, this paper
will be selected for your copies. If the paper size of the originals is not available, the
most acceptable size for your copies is selected.
The following procedure describes a simple copy job. You can change the default
settings if your copy job has special properties
Note: If the paper orientation in this tray does not match the feed direction of the
originals, the Océ VarioPrint
symbol
Before you begin
Examine your originals to be sure that the automatic document feeder can handle
them (see 'Your originals' on page
If the originals are different sizes or types, use the Assemble jobs wizard to enter
the settings
You can be asked to enter a PIN, coins or a credit card to start the jobs
PIN, coins or a credit card' on page
How to use the automatic document feeder to copy
Place and align the originals face down in the automatic document feeder
1.
originals in the automatic document feeder' on page
Press the 'Copy' key.
2.
[76]
[76] The copy job settings
®
will be shown in the feedback box.
(see 'Your originals' on page
(see 'The copy settings' on page
1055/65/75 rotates the image 90
40).
40).
37).
Simple copying
°
. The rotation
(see 'Need
(see 'Place
43).
162).
93