Scanning From The Platen; Scan From The Platen - Océ VarioPrint 1055 User Manual

Scanning from the platen

Scan from the platen

Introduction
The platen is where you place originals that the automatic document feeder cannot
handle (see 'Your originals' on page
your original.
You must adjust the page size only if the size of the original is not A4/Letter 8.5x11.
How to scan an original from the platen
Place and align the originals face down on the platen
1.
platen' on page
Press the 'Scan' key.
2.
Select a destination for your digital document ('to Océ Intra Logic', 'to Email', 'to
3.
USB stick', 'to server')
Use the scroll wheel to select a scan profile, if necessary
4.
on page 120).
Press the 'Edit' key or press the scroll wheel key.
5.
Select '1-sided' in the 'Original' box.
6.
Press the 'Digital document' key.
7.
Select the size and orientation in the 'Size' box.
8.
Make sure that the orientation matches the location of the original on the platen.
[108]
[108] Select the page size for the digital document
Press the start key .
9.
Note: You can be asked to enter one or more identification codes
the digital document' on page
Do not forget to remove the original from the platen.
10.
45).
(see 'The destination for the digital document' on page
122).
40). The platen cannot detect the dimensions of
(see 'Place an original on the
Scan from the platen
119).
(see 'The scan profiles'
(see 'The name of
127