Improve The Copy Quality When The Original Is A Photo - Océ VarioPrint 1055 User Manual

Improve the copy quality when the original is a photo

Improve the copy quality when the original is a photo
Introduction
The Océ VarioPrint
originals. The best quality for your copies is selected. Therefore, you are advised not
to change the image quality after that you have made a test copy.
Before you begin
First make a test copy to check your quality settings, especially for a large job.
How improve the copy quality when the original is a photo
Place and align the photo face down on the platen
1.
platen' on page
Press the 'Copy' key.
2.
Select '1-sided' in the 'Original' and 'Copy' boxes.
3.
Select 'No' in the 'Staple' box.
4.
Press the 'Paper' key.
5.
Select the required copy size in the 'Tray' box.
6.
Press the 'Extra' key.
7.
Select the 'Quality' tab.
Select 'Photo' in the 'Image' box.
8.
[94]
[94] Improve the image quality of a photo
Use the scroll wheel to select a 'Lighter or darker' value from 2 down to -2.
9.
Use the numeric keys to enter the number of copies.
10.
Press the Start key .
11.
Do not forget to remove the photo from the platen.
12.
112 Chapter 7 The copy jobs
®
1055/65/75 can detect photos, rasters and fine lines on your
45).
(see 'Place an original on the