Table of Contents
Advertisement
Assemble separate scan job parts (Combined scan job)
Assembling jobs
Assemble separate scan job parts (Combined scan job)
Introduction
Use the 'Combined scan job' wizard to scan with separate job parts
originals' on page
job parts.
Before you begin
Examine your originals and create separate job parts
page
40).
How to assemble separate scan job parts
Press the 'Wizards' key.
1.
Make sure the 'Assemble jobs' wizards
2.
Select the 'Combined scan job' wizard.
3.
[121]
[121] The 'Combined scan job' wizard
Press 'Add'.
4.
[122]
[122] The wizard has started
Place and align the originals of the first job part face down.
5.
Indicate the destination for the combined scan job.
6.
Press the 'Edit' key or press the scroll wheel key.
7.
Enter the settings for the combined job.
8.
Enter the settings for the first job part.
9.
Press the Start key
10.
136
Chapter 8 The scan jobs
40). The wizard explains step by step how to scan with separate
to start scanning of the first job part.
(see 'Your originals' on
are selected.
(see 'Your
Advertisement
Table of Contents
