Using the automatic document feeder to
scan
Simple scanning
Introduction
Use the automatic document feeder to scan your documents in a quick and easy way.
When you insert the originals, the automatic document feeder detects their
dimensions. The same page size will be selected for your digital document.
The following procedure describes a simple copy job. You can change the default
settings if your scan job includes special properties
page
169).
Before you begin
Examine your originals to be sure that the automatic document feeder can handle
them
(see 'Your originals' on page
If the originals are different sizes or types, use the Assemble jobs wizard to enter
the settings
You can be asked to enter a PIN, coins or a credit card to start the jobs
PIN, coins or a credit card' on page
How to use the automatic document feeder to scan
Place and align the originals face down in the automatic document feeder
1.
originals in the automatic document feeder' on page
Press the 'Scan' key.
2.
Select a destination for your digital document ('to Océ Intra Logic', 'to Email', 'to
3.
USB stick', 'to server')
[103]
[103] Select a destination for the digital document
Use the scroll wheel to select a scan profile, if necessary
4.
on page
120).
Press the 'Edit' key or press the scroll wheel key.
5.
Select '1-sided' or '2-sided' in the 'Original' box.
6.
(see 'Your originals' on page
(see 'The destination for the digital document' on page
(see 'The scan settings' on
40).
40).
37).
43).
(see 'The scan profiles'
Simple scanning
(see 'Need
(see 'Place
119).
123