Copying On Special Material; Copy On Special Material Placed In A Paper Tray - Océ VarioPrint 1055 User Manual

Copying on special material

Copy on special material placed in a paper tray

Introduction
You can use the following material for the copy jobs.
Paper that is already in the trays.
Special material that you place in a tray for the current job.
Special material that is not suitable for the trays. You can insert such a sheet into
the special feeder.
The Key operator can have locked the paper-compartment door. This means that you
cannot load the special paper.
Before you begin
Check which paper tray is suitable for your material
Bins' on page
How to copy on special material placed in a paper tray
Open the paper-compartment door, place your special material and close the door.
1.
If you use pre-printed or punched material, pay attention to how you place the
material (see 'Add paper to paper tray 1, 2 and 3' on page 147)(see 'Add paper to
paper tray 4' on page
Place and align the originals face down
2.
document feeder' on page 43)(see 'Use the platen to create an enlarged or reduced
copy' on page
Press the 'Copy' key.
3.
Select '1-sided' or '2-sided' in the 'Original' and 'Copy' boxes.
4.
Select 'Yes' or 'No' in the 'Staple' box.
5.
Press the 'Paper' key.
6.
Select the tray in which you placed the material, in the 'Tray' box.
7.
[87]
[87] Select the tray with the special material
Use the numeric keys to enter the number of copies.
8.
175).
145).
103).
Copy on special material placed in a paper tray
(see 'Input Trays and Output
(see 'Place originals in the automatic
105