Copy On Special Material Inserted In The Special Feeder - Océ VarioPrint 1055 User Manual

Copy on special material inserted in the special feeder

Introduction
The paper trays cannot handle all materials on which you can copy. If you want to
copy on material that is not suitable for the paper trays, you can insert the material
into the special feeder, one sheet at a time. Be aware that the special feeder also has
restrictions on the use of material
The Key operator can decide to disable the special feeder. Then you can only put
your material into the paper trays
tray' on page
Before you begin
Check if the special feeder can handle your special material
Output Bins' on page
How to copy on special material inserted in the special feeder
Insert one sheet of the special material in the special feeder
1.
the special feeder' on page
The face-down side will be printed.
Place and align the original face down
2.
document feeder' on page 43)(see 'Place an original on the platen' on page
Press the 'Copy' key.
3.
Press the 'Paper' key.
4.
Select 'Special feeder' in the 'Tray' box.
5.
Use the scroll wheel to select the size of the material you inserted.
6.
[88]
[88] Select the size of the material inserted in the special feeder
Press the 'Basic settings' key.
7.
Select '1-sided' or '2-sided' in the 'Original' box.
8.
Note: The 'Staple' and 'Copy' functions are locked. You must feed the sheet a second
time to copy 2-sided on the special material.
Copy on special material inserted in the special feeder
(see 'Input Trays and Output Bins' on page
(see 'Copy on special material placed in a paper
105).
175).
150).
(see 'Insert material into
(see 'Place originals in the automatic
175).
(see 'Input Trays and
45).
107