Add Paper To Paper Tray 4 - Océ VarioPrint 1055 User Manual

Add paper to paper tray 4

Introduction
You can access the paper trays when you open the paper-compartment door. The
number of each paper tray is displayed on the paper trays. The jobs that need
A4/Letter 8.5x11 sized paper, fetch paper from paper tray 4, unless you have selected
an other paper tray.
You can check the paper supply when you press the Status and system key .
[129]
[129] The four paper trays
When to do
Add new paper when:
A message is displayed, to indicate that paper tray 4 is empty.
There is not enough paper for a large job.
Before you begin
Check the paper to be sure it is according to the specifications
Output Bins' on page
Attention: The outer sheets and the edges of the sheets in a pack of paper can
be contaminated with glue from the wrapping. Do not use the contaminated
sheets. If the glue enters the processing section, the drum will become dirty. You
will require assistance from Océ Service.
175).
Add paper to paper tray 4
(see 'Input Trays and
145