Improve The Scan Quality If The Original Is A Photo - Océ VarioPrint 1055 User Manual

Improve the scan quality if the original is a photo

Introduction
The Océ VarioPrint
originals. The best quality for your digital documents is selected. Therefore, you are
advised not to change the image quality after that you have made a test copy.
Before you begin
First make a test copy to check your quality settings.
How to improve the scan quality if the original is a photo
Place and align the photo face down on the platen
1.
platen' on page
Press the 'Scan' key.
2.
Select a destination for your digital document ('to Océ Intra Logic', 'to Email', 'to
3.
USB stick', 'to server')
Use the scroll wheel to select a scan profile, if necessary
4.
on page 120).
Press the 'Edit' key or press the scroll wheel key.
5.
Select '1-sided' in the 'Original' box.
6.
Press the 'Quality' key.
7.
Select 'Photo' in the 'Image' box.
8.
Use the scroll wheel to select a 'Lighter or darker' value from 2 down to -2.
9.
[126]
[126] Select Photo to improve the image quality
Press the Start key .
10.
Note: You can be asked to enter one or more identification codes
the digital document' on page
Do not forget to remove the original from the platen.
11.
Improve the scan quality if the original is a photo
®
1055/65/75 can detect photos, rasters and fine lines on your
45).
(see 'The destination for the digital document' on page
122).
(see 'Place an original on the
(see 'The scan profiles'
(see 'The name of
119).
139