Use The Platen To Create An Enlarged Or Reduced Digital Document - Océ VarioPrint 1055 User Manual

Use the platen to create an enlarged or reduced digital document

Use the platen to create an enlarged or reduced digital
document
Introduction
The platen is the location where you place one original that the automatic document
feeder cannot handle. The platen cannot detect the dimensions of your original. If
you want to enlarge or reduce your digital document, you must select the page size
and the reduction or enlargement. The scanned image is aligned against the
right-upper corner of the page.
[40]
Zoom direction
[109]
Before you begin
First make a test copy to check your scan settings. Make sure that the settings do not
result in the loss of image information or gray borders.
How to create an enlarged or reduced digital document from the platen
Place and align the originals face down on the platen
1.
platen' on page
Press the 'Scan' key.
2.
Select a destination for your digital document ('to Océ Intra Logic', 'to Email', 'to
3.
USB stick', 'to server')
Use the scroll wheel to select a scan profile, if necessary
4.
on page 120).
Press the 'Edit' key or press the scroll wheel key.
5.
Select '1-sided' in the 'Original' box.
6.
Press the 'Digital document' key.
7.
Select the required page size and orientation in the 'Size' box.
8.
Check that the orientation of the page size matches the location of the original on the
platen.
128 Chapter 8 The scan jobs
45).
(see 'The destination for the digital document' on page
Location of image on the page
[110]
(see 'Place an original on the
(see 'The scan profiles'
119).