Stop A Copy Job - Océ VarioPrint 1055 User Manual

Stop a copy job

Introduction
You can stop the copy job, for example when you notice that the output of your copy
job is not correct.
Note: You can also interrupt a copy job. You or someone else can start a new job.
You can resume the suspended job afterwards
page 113).
How to stop a copy job
[35]
If you want to
Stop the scanning of originals
Stop the copying after finishing
the current set
Stop the copying immediately
Cancel the copy job
(see 'Interrupt a copy job' on
Then
Press the 'Cancel job' key.
Press the Stop key
Press the Start key
Press the Stop key
Press the Start key
Press the Stop key
Your job is canceled.
Stop a copy job
once.
to resume.
twice.
to resume.
three times.
115