Stopping Or Interrupting Copying; Interrupt A Copy Job - Océ VarioPrint 1055 User Manual

Stopping or interrupting copying

Interrupt a copy job

Introduction
You can temporarily stop your print job, for example because someone else does not
want to wait until your large copy job is ready. You can interrupt the copying of the
job, and a new copy, print or scan job can be started. When the new jobs are ready,
you can continue your large print job.
Note: The Key operator can decide to disable the Interrupt job function.
Note: You cannot interrupt a job if you need coins or a credit card to start a job.
Interrupting a copy job
Press the 'Interrupt job' key while a job is copied.
1.
[95]
[95] Press the Interrupt job key
Wait until the display screen indicates that you can start new jobs.
2.
[96]
[96] The job is interrupted
Press the 'Copy', 'Print' or 'Scan' key to go to the settings for the new job.
3.
Press the Start key
4.
interrupting a job.
to start the new job. The
Interrupt a copy job
icon indicates that you are
113