Copy an A5/Us Std 5.5x8.5 original from the platen
Copy an A5/Us Std 5.5x8.5 original from the platen
Introduction
The platen is the location where you place one original that the automatic document
feeder cannot handle. The platen cannot detect the dimensions of your original
'Your originals' on page
the platen, you must set the paper size of your original.
When the required copy size is not A5/Us Std 5.5x8.5, you must set the copy size
and adjust the enlargement or reduction
or reduced copy' on page
How to copy an A5/Us Std 5.5x8.5 original from the platen
Place the original face down in the left rear corner. Align the short edge of the
1.
original in vertical position on the platen
page
45).
Close the cover of the platen.
2.
Press the 'Copy' key.
3.
Select '1-sided' in the 'Original' and 'Copy' boxes.
4.
Select 'No' in the 'Staple' box.
5.
Press the 'Paper' key.
6.
Select the A5/Us Std 5.5x8.5 paper size in the 'Tray' box.
7.
[84]
[84] Select A5/Us Std 5.5x8.5
Use the numeric keys to enter the number of copies.
8.
Press the Start key .
9.
Do not forget to remove the original from the platen.
10.
102
Chapter 7 The copy jobs
40). When you copy an A5/Us Std 5.5x8.5 original from
(see 'Use the platen to create an enlarged
103).
(see 'Place an original on the platen' on
(see