Stop A Print Job - Océ VarioPrint 1055 User Manual

Stop a print job

Stop a print job
Introduction
You can stop the printing of a job, for example when you notice that the output of
your print job is not correct.
Note: You can also interrupt the printing before the print job is ready. You or
someone else can start a new job. You can resume the suspended job afterwards
'Interrupting a Print Job' on page
How to stop a print job
[33]
If you want to
Stop the printing of automatic
print jobs, for example to start
another job
Stop the printing of the job after
finishing the current set
Stop the printing of the job
immediately
Cancel the print job
90 Chapter 6 The print jobs
88).
Then
Press the 'Print', 'Scan' or 'Copy' key. You can
start another job after the current automatic
print job is finished. The printing of the
automatic print jobs resumes when your job is
ready.
Press the Stop key
Press the Start key
Press the Stop key
Press the Start key
Press the Stop key
The job is stored in the mailbox.
once.
to resume.
twice.
to resume.
three times.
(see