Insert Material Into The Special Feeder - Océ VarioPrint 1055 User Manual

Insert material into the special feeder

Insert material into the special feeder
Introduction
Use the special feeder when the paper trays cannot handle the material. The special
feeder accepts one sheet at a time.
Note: The Key operator can decide to disable the special feeder.
Before you begin
Check the paper to be sure it is according to the specifications
Output Bins' on page
How to insert material into the special feeder
Pull the special tray down. This tray is located above the paper-compartment door.
1.
Use the notched grip.
[138]
Use the correct feed direction for labeled or punched material.
2.
[139]
[139] Long-edge feed direction
or
[140]
[140] Short-edge feed direction
Insert a sheet of special material into the special feeder.
3.
150 Chapter 9 Paper, toner and staples
175).
(see 'Input Trays and