Traction Manifold Components - Genie ZX-135/70 Service Manual

Service Manual
Manifolds
8-9

Traction Manifold Components

The traction manifold is mounted inside the manifold box at the blue triangle side of the machine.
Index
Description
No.
1 Check valve, 5 psi / 0.3 bar
2 Solenoid Valve, 2 position 3 way
3 Solenoid Valve, 2 position 3 way
4 Check valve, 5 psi / 0.3 bar
5 Shuttle Valve, 3 position 3 way
6 Relief valve, 250 psi / 17.23 bar
Orifice Plug, 0.030 inch /
7
0.762 mm
8 Check valve, 5 psi / 0.3 bar
9 Check valve, 5 psi / 0.3 bar
10 Flow divider/combiner valve
11 Check valve, 5 psi / 0.3 bar
Flow control valve, 2 gpm / 7.6
12
L/min
178
Schematic
Function
Item
K Anti-cavitation
P Two-speed drive motor shift
Q Brake release
R Brake circuit
Charge pressure circuit that
D directs hot oil out of low
pressure side of drive pumpp
E Charge pressure circuit
S Brake and two-speed circuit
N Drive motor anti-cavitation
M Drive motor anti-cavitation
Controls flow to square end
drive motors in forward and
C
reverse
L Drive motor anti-cavitation
Equalizes pressure on both
H sides of divider/combiner
valve
ZX-135/70
August 2014
Torque
30-35 ft-lbs / 40.7-47.5 Nm
26-30 ft-lbs / 35.3-40.7 Nm
26-30 ft-lbs / 35.3-40.7 Nm
20-25 ft-lbs / 27.1-33.9 Nm
50-55 ft-lbs / 67.8-74.6 Nm
20-25 ft-lbs / 27.1-33.9 Nm
20-25 ft-lbs / 27.1-33.9 Nm
20-25 ft-lbs / 27.1-33.9 Nm
30-35 ft-lbs / 40.7-47.5 Nm
90-100 ft-lbs / 122-135.6 Nm
20-25 ft-lbs / 27.1-33.9 Nm
30-35 ft-lbs / 40.7-47.5 Nm
Part No. 218700