Genie ZX-135/70 Service Manual page 123

Service Manual
Platform Components
Confirm the setting:
5 Start the engine from the platform controls.
6 Lift the test weight off the platform floor using
a suitable lifting device.
7 Place the test weight back onto the center of
the platform floor using a suitable lifting
device.
Result: The alarm should be off. The platform
overload indicator light should be off at the
platform controls and there should be no error
message on the LCD display at the ground
controls.
Note: There may be an 2 second delay before the
overload indicator lights and alarm turn off.
8 Add an additional 12 lb / 5.4 kg test weight to
the original test weight to overload the
platform.
Result: The alarm should be sounding. The
platform overload indicator light should be
flashing at the platform controls and platform
overload should be displayed on the LCD
screen at the ground controls.
Note: There may be a 2 second delay before the
overload indicator lights flash and the alarm
sounds.
108
9 Test all machine functions from the platform
controls.
Result: All platform control functions should
not operate.
10 Turn the key switch to ground controls.
11 Test all machine functions from the ground
controls.
Result: All ground control functions should not
operate.
ZX-135/70
August 2014
Part No. 218700