Genie ZX-135/70 Service Manual page 25

Service Manual
Specifications
Machine Torque Specifications
Platform Rotator
1-8 center bolt, GR 5
3/8 -16 bolts, GR 8
Turntable rotate assembly
Rotate bearing mounting bolts, lubricated
(3/4 -10 SHC)
Rotate bearing mounting bolts, lubricated
(5/8 -11 SHC)
Rotate drive hub mounting bolts, lubricated
Drive motor mounting bolts, dry
Drive motor mounting bolts, lubricated
Backlash plate mounting bolts, lubricated
10
Drive motors and hubs
Drive hub mounting bolts, lubricated
480 ft-lbs
Drive motor mounting bolts, dry
651 Nm
44 ft-lbs
Drive motor mounting bolts, lubricated
60 Nm
Engine vibration isolators
320 ft-lbs
Mounting bolts, dry
434 Nm
180 ft-lbs
Mounting bolts, lubricated
244 Nm
80 ft-lbs
Continuous improvement of our products is a
108 Nm
Genie policy. Product specifications are
75 ft-lbs
subject to change without notice or obligation.
102 Nm
56 ft-lbs
76 Nm
320 ft-lbs
434 Nm
ZX-135/70
August 2014
180 ft-lbs
217 Nm
75 ft-lbs
102 Nm
56 ft-lbs
76 Nm
60 ft-lbs
81 Nm
45 ft-lbs
61 Nm
Part No. 218700