Genie ZX-135/70 Service Manual page 90

August 2014
7 Remove the turntable cover using a suitable
lifting device.
Crushing hazard. The turntable
cover may become unbalanced
and fall if not properly supported
and secured to a suitable lifting
device.
8 Remove the ground control box mounting
fasteners. Move the ground control box out of
the way.
9 Remove the cover from the auxiliary power
unit batteries.
10 Tag and disconnect the cables from the
auxiliary power unit batteries.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
11 Tag and disconnect the cables from the
engine starting battery located on the engine
side of the machine.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
Part No. 218700
Checklist E Procedures
12 Attach an overhead crane or similar lifting
device to the battery box for the auxiliary
power unit batteries.
13 Remove the battery box retaining fasteners
and carefully remove the battery box from the
machine.
14 Remove the hydraulic tank retaining
fasteners.
15 Support the hydraulic tank with 2 lifting straps.
Place one lifting strap at each end of the tank
and attach the lifting straps to an appropriate
lifting device.
16 Remove the hydraulic tank from the machine.
17 Remove the suction strainers from the tank
and clean them using a mild solvent.
ZX-135/70
Service Manual
Crushing hazard. The battery
box could become unbalanced
and fall when removed from the
machine if not properly
supported.
Bodily injury hazard. Batteries
contain acid. Avoid spilling or
contacting battery acid.
Neutralize battery acid spills with
baking soda and water.
Crushing hazard. The hydraulic
tank could become unbalanced
and fall if not properly supported
when removed from the
machine.
75