Table of Contents
Advertisement
6.0 oPERATIon
In viewing mode, several features are available to make watching TV a true pleasure. This paragraph
describes these features. Please also read chapter 7.0 to get familiar with the menu of your new receiver.
6.1 Changing channels
Your new receiver is equipped with three ways to change channels.
via direct access
„
„
via the channel list and
„
„
via the P+/P- keys.
„
„
6.1.1 Direct access
To gain direct access to a certain channel, simply input its number with the [0~9] key's on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits is
possible. Just wait a few seconds and your receiver will switch to the selected channel.
6.1.2 Channel list
Press ok in viewing mode to display the Channel List. Use pq in the Channel List to highlight your
channel of choice and press ok once to select the highlighted channel. Press ok again to leave the
Channel List. The Channel List is equipped with a filter function to make finding your favourite channels
easier. While in the Channel List, press RED. An alphabet banner will now be displayed. Use pq to select
the first letter of the desired channel and ok to confirm. All channels beginning with the chosen letter
will now be displayed.
The following keys are available in the Channel list and viewing mode:
Tv/R:
sAT:
fAv:
6.1.3 Using the P+/P- keys
P+ or p will switch to a higher channel.
P- or q will switch a lower channel.
6.2 Info banner
At any time during viewing mode you can press the Info button to get info about the current channel
and program*. Press Info twice to see technical details about the current channel.
* Program information is displayed when available. Availability depends from broadcast.
6.3 selection of audio language
Some channels support a choice of different audio formats and/or languages. To select another audio
stream, press AUDIo in viewing mode. A list with available audio streams will now be displayed. Use
pq to select the desired stream and confirm with ok.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the blUE button in viewing mode
and use the [0~9] buttons to input the number of the page you wish to see. The coloured buttons of the
8
Toggles between TV and radio channels
changes the satellite
to switch to one of the available favourite lists.
PART 1 • English
Advertisement
Table of Contents
