Advanced - Strong SRT 7300 CI+ User Manual

PART 1 • English

7.4 Advanced

This sub menu gives you access to advanced functions such as updating and factory reset. The following
options are available: Common Interface, System Info, USB Update, OTA and Factory Reset.
7.4.1 Common Interface
The receiver is equipped with one slot of Common Interface which have access to the scrambled the pay
per view services with various conditional access modules and a valid smart card.
Depending from module you can read module information, smart card information, download new
software for module and set up module language.
The programs that can be descrambled are determined by the conditional access module and smart card you use.
7.4.2 system Info
Displays valuable information about the software and hardware version of your receiver and our web
address www.strong.tv . A customer support agent might ask for the information given in this screen.
Press EXIT to leave the System Info screen.
7.4.3 Usb Update
This function allows you to perform a system upgrade from an USB device. You can also use it to export
your channel list to a connected USB device.
Exporting channel data
To export all channel data, enter USB Update and press blUE. Follow the directions on screen. This
function requires a correctly formatted USB storage device to be connected to the receiver.
software upgrade
The software files should be placed in the root directory of the device. Connect the USB device to the
receiver and enter USB update. An attention banner will now be displayed. Press ok to start the update.
WARnIng:
7.4.4 oTA
The OTA (Over the Air) function allows you to search for software updates available on satellite. Please
ask your local Strong dealer or visit our website for according information.
In the OTA menu make all necessary settings (Satellite, Frequency, Polarisation and Symbolrate) and press
gREEn to start the update process.
WARnIng:
NEVER power off the receiver or remove the USB device during the software
update process. Doing so might cause irreparable damage to your receiver and
will void your warranty.
NEVER power off the receiver or pull the mains plug during the software
upgrade process. Doing so might cause irreparable damage to your receiver
and will void your warranty.
17