Table of Contents
Advertisement
2.3 Rear Panel
1. sAT In
2. sAT oUT
3. AUDIo (l/R)
4. vIDEo (RCA)
5. s/PDIf
6. Tv sCART
7. IR
8. hDmI
9. Power switch
10. Power cord
2.4 Remote Control Unit
1. q
2. !
3. [0~9]
4. sAT
5. Tv/R
6. mEnU
7. EXIT
8. pq
9. tu
10. ok
11. fAv
12. EPg
13. v+/v-
14. Info
15. AUDIo
16. TEXT
17. P+/P-
18. RED/RCl
4
To connect to the LNB of your satellite dish for reception of satellite
broadcast signal
To loop through the satellite signal to a second receiver
To connect to the audio input of your HIFI or television
To connect to the RCA video input of your TV or VCR using an RCA cable
To connect to a digital or home cinema audio amplifier
To connect to TV using a SCART cable
To connect the IR extender
To connect to the HDMI input of your TV using a good quality HDMI cable.
To switch the mains power ON or OFF
The receiver requires a mains voltage of 100 ~ 240 V AC 50 ~ 60Hz
(auto selecting). Please check the local power conditions before
connecting the receiver to the mains supply.
Turns the receiver ON/Standby
Mutes the audio output of the receiver
Channel number and numeric value input
Satellite selection in normal viewing and channel mode
Toggles between TV and Radio mode
Displays the menu in viewing mode or to go back one step in the menu
Go back one step in the menu/cancellation of current process/exit
from main menu to viewing mode
Switches to the next/previous channel in viewing mode or moving the
highlight up/down in the menu
Increasing/decreasing of the volume level in viewing mode or
changing values of settings in the menu
Viewing mode:
Displays the channel list. Menu: activation of the
highlighted item
Toggles between available favourite groups and all channels list
Viewing mode:
Displays the EPG (Electronic Program Guide)
Increasing/decreasing of the volume level
Press once to display channel number/name and now/next info.
Press twice to display frequency/signal strength information.
Displays the audio selection menu with selections for available
languages and audio modes
Displays the teletext browser
Switches to next/previous channel in viewing mode
Toggles between the current channel and the previous channel in
viewing mode
PART 1 • English
Fig 2.
Fig. 3.
Advertisement
Table of Contents
