Table of Contents
Advertisement
PART 1 • English
symptom
The USB storage device
is not working properly.
The external USB
HDD does not start.
The receiver switches
to STBY automatically.
9.0 sPECIfICATIons
Demodulator
Demodulation:
Input Symbol Rate:
DVB-S2 8PSK/QPSK:
FEC Decoder:
video Decoder
Profile Level:
Input Rate:
Aspect Ratio:
Frame Rate:
Video Resolution:
Audio Decoder
Audio Decoding:
Audio Mode:
Frequency Response:
Sampling Rate:
Tuner
Connector:
Input Frequency Rage:
RF Impedance:
Signal Level:
LNB Power:
DiSEqC Versions:
Cause
Wrong formatted.
Power consumption is too high.
Auto Power Down function is
activated and reached the adjusted
time (default 3h).
QPSK, 8 PSK
DVB-S QPSK:1~45 Ms/s
10~30 Ms/s
Auto,1/2, 2/3, 3/4, 5/6, 7/8 in DVB-S mode;
1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 in DVB-S2 mode
2/3, 3/5, 3/4, 5/6, 8/9, 9/10 in DVB-S2 8PSK mode.
MPEG-2 MP@ML, MP@HL, MPEG-4 H.264/AVC
Max. 90 Mbit/s
4:3, 16:9, Pan & Scan, Letterbox, Combined
25 Hz for PAL, 30 Hz for NTSC
576p, 720p, 1080i
MPEG-1 Layer 1&2, MPEG 4 H.264 AAC, AC3 Downmix
Mono L/R, Stereo, AC 3
20 Hz~20 kHz, <+/-2 dB
60 Hz ~ 18 kHz <+/- 0.5 dB
32, 44.1, 48 kHz
1xF Type , IEC169-24, Female
950-2150 MHz
75 Ohm unbalanced
-75 to -25 dBm
13 / 18 V DC (+/-5%)
Max. 0.5 A max, overload protected
1.0, 1.1, 1.2, GOTO X, Tone Burst.
Remedy
Format USB device by receiver in
menu Channel>File Explorer.
Connect an extra power supply
adapter to your USB HDD device.
In the menu Setup>Time Setting you
can adjust the Auto Power Down time
or disable it.
19
Advertisement
Table of Contents
