Strong SRT 7300 CI+ User Manual page 19

listening to mP3 music
Select the desired MP3 file and press ok to start playback.
During playback, the following functions are available:
:
"
3
5 shuffle:
6 repeat:
To exit the file explorer: Use EXIT to get back to the Root directory of your USB device.
Press EXIT once more to leave the File Explorer.
note:
Playback of MP3 music will continue as long as the File Explorer is active. This allows you to listen to MP3
music while watching photos.
Tip:
7.3.4 Timer
Timers can be used to schedule recordings or to switch to a certain channel at a desired moment. It will
help you not to miss your favourite events.
Use pq to select one of the eight available timers. Press ok to advance. The Edit Timer screen will now
be displayed. Use pq to switch between settings and tu or [0~9] to adjust the value of a setting.
Cycle:
Date:
Time:
Action:
Channel:
Duration:
Once all settings are made, press EXIT to leave the menu. A confirmation banner will be shown. Press
ok to save the timer or EXIT to discard.
Deleting a timer
In order to delete a set timer, select it with pq and press RED. A confirmation banner will now be
shown. Press ok to delete or EXIT to cancel.
note:
16
starts playback of the next MP3.
starts playback of the previous MP3.
stops playback.
All files in the directory will be played back in random order.
Press once for single track repeat or twice to repeat all files.
Please consider that File Explorer needs a correctly formatted USB device in
order to work with your receiver.
The File Explorer will only show files when a correctly formatted USB device is
connected to the receiver.
Choose between Once, Everyday or Weekly.
With Cycle set to Once: press ok to display the calendar. Use pqtu to pick
the date for the recording and confirm with ok.
With Cycle set to Weekly: Use tu to select the day of the week at which the
timer will start.
Use the [0~9] buttons to enter the time at which the timer will start.
Use tu to choose between Play or Record. Select Record to set a timed recording.
Press ok to display the channel list and use pq to select the channel that the
receiver should use for the timed action.
Use the [0~9] buttons to digit the duration of the timer.
In case one timer is in conflict with another or if the set time has already passed,
the receiver will display a warning and asks you how to solve the conflict.
PART 1 • English