Fig.1; Equipment Set-Up; Accessories; Usage Of External Usb Devices - Strong SRT 7300 CI+ User Manual

PART 1 • English

1.3 Equipment set-up

We recommend you consult a professional installer to set up your equipment. Otherwise, please follow
the instructions below:
Refer to the user manual of your TV and your antenna.
Make sure that the SCART cable and outdoor components are in a good condition and the SCART
connections are well shielded
This manual provides complete instructions for installing and using this receiver. The following symbols
will serve as follow.
WARnIng
Tips
mEnU
move to

1.4 Accessories

User's Manual
„ „
1 Remote control unit
„ „
IR Extender
„ „
2x Batteries (AAA type)
„ „
note:

1.5 Usage of external Usb devices

It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB 2.0 specifications,
recording, playback and other multimedia functions of the receiver would not work properly.
STRONG cannot guarantee compatibility to all types of USB storage devices.
It is advised not to store important information on USB storage devices used with the receiver. Always
make backups of data on your USB storage device before using it with this receiver. STRONG will not
take responsibility for any loss of information or circumstances caused by loss of information.
Please ensure that either the USB device is already formatted to FAT/FAT32, or format the USB device via
your receiver, refer to chapter 7.3.3 File Explorer for details.

2.0 YoUR RECEIvER

2.1 DEfAUlT PIn-CoDE: 0000

2.2 front Panel

1. standby/on switch turns the receiver ON or to Standby
2. Usb connector
3. 4 digit lED display displays channel number or time, depending on settings.
4. CI slot
Indicates warning information.
Indicates any other additional important or helpful information.
Represents a button on the remote control or the receiver (bold Character)
Represents a menu item within a window. (Italic Character)
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
connect your USB device (stick, HDD, etc.) to this port
Common Interface slot for your decoder module

Fig.1

3