Remote Control Handset Wall Holder Installation - Valor Portrait 530ILN Installation & Owner's Manual

QUALIFIED

Remote Control Handset Wall Holder Installation

INSTALLER
The remote control kit for this  replace comes
complete with a wall-mounted holder. This
holder is not required in all installations but
is provided as an optional feature for those
customers who wish to mount the remote
handset to the wall.
To install the holder to the wall,  nd a
convenient location and use the hardware
provided with the kit. See the diagram on the
right for required hardware and con gurations.
Note that the holder can be installed at the base
of a light switch plate.
IMPORTANT. The location of the remote
control handset is important to assure proper temperature regulation. To obtain a constant
temperature, we recommend that the handset should be between 3 and 15 feet away from the
appliance but not directly above it. We also advise that the handset should be located away
from any other heat source and not in direct sunlight as this may affect the temperature sensor
located in the remote handset.
38
Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Alternative 1
Alternative 2 Alternative 3
Switch Plate