Ceramic Walls Installation (Logs And Coals Only) - Valor Portrait 530ILN Installation & Owner's Manual

Ceramic Walls Installation (logs and coals only)

The 530IL and 530IC engines are provided with a set of
reversible walls. One side shows the brick pattern and
the reverse side shows a black vertical  uted pattern.
Follow the instructions below to install the wall set on
the chosen side.
• For ceramic walls installation for 530IR engine,
see Ceramic Rocks Installation section in this
manual.
• At this point, you can install the 567FGP Top
Grille, if used (logs or rock version only)
• The 567FGP Top Grille is sold separately except
with the 569 Ledge Front Kit or 575/578 Lift Kit.
1
1. Locate the ceramic rear wall in the channel at back
of the  rebox and  at against the back of the  rebox.
2. Locate the sidewalls in the channels at the sides of
the  rebox.
3. Remove two screws from under the top front of the
 rebox. Using these screws  t the port cover.
2
QUALIFIED
INSTALLER
3
31