Remote Control Handset Wall Holder Installation; Owner's Information - Valor Legend G4 780IN Installation & Operating Instructions Manual

Remote Control Handset Wall Holder Installation

The remote control kit for this fireplace
comes complete with a wall-mounted holder.
This holder is not required in all installations
but is provided as an optional feature for
those customers who wish to mount the
remote handset to the wall.
To install the holder to the wall, find a
convenient location and use the hardware
provided with the kit. See the diagram below
for required hardware and configurations.
Note that the holder can be installed at the
base of a light switch plate.
IMPORTANT. The location of the remote
control handset is important to assure
proper temperature regulation. To obtain a constant
temperature, we recommend that the handset should
be between 3 and 15 feet away from the appliance
but not directly above it. We also advise that the
handset should be located away from any other heat
source and not in direct sunlight as this may affect the
temperature sensor located in the remote handset.
WARNING
HOT HEARTH! The hearth in front of the fireplace
becomes very hot when the fireplace heats. Do not
use the hearth as a seat or shelf.
WARNING
HOT GLASS! The use of a screen in front of
the glass is highly recommended particularly in
households with children.
CAUTION
Your fireplace becomes very hot when operating.
Avoid placing decorating objects sensitive to heat
within 36 inches (0.9 m) around it.
Performance of LPG appliances may be affected by
the quality of commercial gas supplied in your area.
24
Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Alternative 1

Owner's Information

Warranty
Card at the
back of this
manual.
Read the Safety
Information
section on page 4
of this manual.
Operating Your
Fireplace
For your safety, this appliance is fitted with a flame
supervision device which will shut-off the gas supply
if, for any reason, the pilot flame goes out. This device
incorporates a fixed probe, which senses the heat
from the pilot flame. If the probe is cool, the device will
prevent any gas flow unless manually lighting the pilot.
See full lighting instructions on page 33 of this manual.
Alternative 2 Alternative 3
Fireplace
Hearth
Do not put
furniture or other objects
in this space in front of
the replace:
36" (0.9 m)
Switch Plate