Remote Control Handset Wall Holder Installation; Owner's Information - Valor LEGEND G4 780IN (NG) Installation And Owner's Manual

Remote Control Handset Wall Holder Installation

OWNER'S INFO
The remote control kit for this fi replace
comes complete with a wall-mounted holder.
This holder is not required in all installations
but is provided as an optional feature for
those customers who wish to mount the
remote handset to the wall.
To install the holder to the wall, fi nd a
convenient location and use the hardware
provided with the kit. See the diagram below
for required hardware and confi gurations.
Note that the holder can be installed at the
base of a light switch plate.
IMPORTANT. The location of the remote
control handset is important to assure proper
temperature regulation. To obtain a constant temperature, we recommend that the handset should be between 3
and 15 feet away from the appliance but not directly above it. We also advise that the handset should be located
away from any other heat source and not in direct sunlight as this may affect the temperature sensor located in the
remote handset.
WARNING
EXTREMELY HOT!!!
• Some parts of your fi replace are EXTREMELY
HOT, particularly the window.
• DO NOT LET CHILDREN touch the glass or
any parts of your fi replace even after it is turned
off as it is still hot.
• USE A SAFETY SCREEN or a GATE to reduce
the risk of burns.
• Keep the remote control handset OUT OF
REACH of children.
• • Some materials or items, although safe, may Some materials or items, although safe, may
discolor, shrink, warp, crack, peel, and so on discolor, shrink, warp, crack, peel, and so on
because of the heat produced by the fi replace. because of the heat produced by the fi replace.
AVOID PLACING candles, paintings, photos, candles, paintings, photos,
AVOID PLACING
and other items and other items SENSITIVE TO HEAT SENSITIVE TO HEAT within
36 inches (0.9 m) around the fi replace.
HOT HEARTH / FLOOR! The hearth or fl oor
• • HOT HEARTH / FLOOR!
in front of the fi replace may become very hot in front of the fi replace may become very hot
when the fi replace heats. Do not use the hearth when the fi replace heats. Do not use the hearth
as a seat or shelf. Solid wood fl ooring in front of as a seat or shelf. Solid wood fl ooring in front of
the fi replace (if allowed) may shrink during the the fi replace (if allowed) may shrink during the
heating season due to heat. heating season due to heat.
26
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F

Owner's Information

The hearth or fl oor
Alternative 2
Packing Contents:
Alternative 1
Performance of LPG appliances may be affected by
the quality of commercial gas supplied in your area.
Warranty
Card at the
back of this
manual.
Read the safety information on pages 3 and
5 of this manual.
Operating Your Fireplace
For your safety, this appliance is fi tted with a fl ame
supervision device which will shut-off the gas supply
if, for any reason, the pilot fl ame goes out. This device
incorporates a fi xed probe, which senses the heat
from the pilot fl ame. If the probe is cool, the device will
prevent any gas fl ow unless manually lighting the pilot.
See full lighting instructions on page 36 of this manual.
Alternative 3
Switch Plate
Fireplace
Hearth
Do not put
furniture or other objects
in this space in front of
the fireplace:
36" (0.9 m)