Table of Contents
Advertisement
QUALIFIED
Remote Control Handset Wall Holder Installation
INSTALLER
The remote control kit for this
fi replace comes complete with a
wall-mounted holder. This holder
is not required in all installations
but is provided as an optional
feature for those customers who
wish to mount the remote handset
to the wall.
To install the holder to the wall,
fi nd a convenient location and
use the hardware provided with
the kit. See the diagram below
for required hardware and
confi gurations. Note that the
holder can be installed at the
base of a light switch plate.
IMPORTANT. The location of
the remote control handset
is important to assure proper temperature regulation. To obtain a constant temperature, we recommend that the
handset should be between 3 and 15 feet away from the appliance but not directly above it. We also advise that
the handset should be located away from any other heat source and not in direct sunlight as this may affect the
temperature sensor located in the remote handset.
44
Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Alternative 1
Alternative 2
Alternative 3
Switch Plate
Advertisement
Table of Contents
