Valor Portrait 530ILN Installation & Owner's Manual page 16

QUALIFIED
Commonwealth of Massachusetts
INSTALLER
(d) MANUFACTURER REQUIREMENTS - GAS
EQUIPMENT VENTING SYSTEM NOT PROVIDED.
When the manufacturer of a Product Approved side
wall horizontally vented gas fueled equipment does
not provide the parts for venting the  ue gases, but
identi es “"special venting systems”", the following
requirements shall be satis ed by the manufacturer:
1. The referenced “"special venting system”" instructions
shall be included with the appliance or equipment
installation instructions; and
2. The “"special venting systems”" shall be Product
Approved by the Board, and the instructions for that
system shall include a parts list and detailed installation
instructions.
(e) A copy of all installation instructions for all Product
Approved side wall horizontally vented gas fueled
equipment, all venting instructions, all parts lists
for venting instructions, and/or all venting design
instructions shall remain with the appliance or
equipment at the completion of the installation.
16