Requirements Of The Rack - Fujitsu PRIMERGY RX100 S3 Operating Manual

Hide thumbs Also See for PRIMERGY RX100 S3:
Table of Contents

Advertisement

Installing/Removing the Server into/from the Rack
4.3.1

Requirements of the Rack

The rack systems of the Fujitsu Siemens Computers (PRIMECENTER Rack,
DataCenter Rack) support fully the installation of the PRIMERGY RX100 S3
server system. The installation into the at present usual rack systems of
different foreign manufacturers (3rd-Party Rack) is supported to large part.
To accommodate the ventilation concept and ensure proper ventilation of the
components in the rack, any unused areas must be closed using dummy covers.
The power is supplied via the socket strips available in the rack.
The main features of the rack systems of the Fujitsu Siemens Computers are:
PRIMECENTER Rack
– Frontally bolted telescopic rails (in the rear left area a support bracket is
used).
The rails are provided with a linear alignment possibility to ensure also an
adjustment to different rack depths.
DataCenter Rack
– Frontally or laterally bolted telescopic rails (in the rear left area a support
bracket is used).
The rails are provided with a linear alignment possibility to ensure also an
adjustment to different rack depths.
28
Hardware Installation
U41615-J-Z156-1-76

Advertisement

Table of Contents
loading

Table of Contents