Installing/removing the server in/from the rack
4.2.1
Rack requirements
The rack systems from Fujitsu Siemens Computers (PRIMECENTER Rack and
DataCenter Rack) fully support installation of the PRIMERGY RX100 S5 server.
Installation in most current rack systems from other manufacturers (3rd party
racks) is also supported.
To accommodate the ventilation concept and ensure proper ventilation, any
unused areas in the rack must be sealed using dummy covers.
The power is supplied via the multiple socket outlets fitted in the rack.
The main features of the rack systems from Fujitsu Siemens Computers are as
follows:
PRIMECENTER rack
– Front bolted telescopic rails (a support bracket is used in the lower left area).
The rails have a linear alignment feature to ensure that they can be adjusted
to different rack depths.
DataCenter Rack
– Front bolted telescopic rails (a support bracket is used in the lower left area).
The rails have a linear alignment feature to ensure that they can be adjusted
to different rack depths.
42
Operating manual
Hardware installation
RX100 S5