Ink Discharge Way Cleaning [Drain Wash] - MIMAKI GP-1810 Operation Manual

Ink discharge way cleaning [Drain Wash]

The ink discharge way may become clogged by coagulated ink. It must be cleaned at regular inter-
vals to avoid clogging.
Ink discharge way: Tubing between the cap and the waste ink tank
• Do not move the carriage out of the capping station by hand.
Use the appropriate operation key to move the carriage.
Cleaning Tools :
STEPS:
1. Press the [FUNCTION] key once.
2. Press the XY [ ] or [ ] keys to select [MAINTE-
NANCE].
3. Press the [ENTER] key.
[Station] is displayed.
4. Press the [ENTER] key.
[Carriage out] is displayed.
5. Press the XY [ ] or [ ] keys to select [Drain
Wash].
6. Press the [ENTER] key.
The table moves backward, the Y-bar moves to the top, the
wiper moves forward, and the carriage moves on the table.
Dry suction starts in cycles consisting of 10 seconds of
suction followed by 10 seconds of pause.
• Cleaning liquid bottle kit A29 (SPC-0137 : Option)
• Syringe
- 3.13 -
FUNCTION
SETUP < ENT >
FUNCTION
MAINTENANCE < ENT >
MAINTENANCE
Station < ent >
Station Maint
Sel : Carriage Out
Station Maint
Sel : Drain Wash
Drain Wash
Completed : ent