Install The Access Cover - Intel C50277-001 User Manual

2 Setting Up the Chassis

Install the Access Cover

1. Place the cover so the tabs on the cover fit into the slots on the server. The cover should be
flush against the chassis.
2. Slide the cover forward until it stops (letter A in the figure below).
3. Slide the two thumb latches to the right to the "lock" position (letter B in figure). For
additional security, you can also replace the shipping screws if desired.
Intel® Entry Server Chassis SC5275-E User Guide
B B
B B
Figure 16. Installing the Access Cover
A A
TP00067
27