Connect Cables To The Server Board - Intel C50277-001 User Manual

2 Setting Up the Chassis

Connect Cables to the Server Board

See your server board product guide or Quick Start User's Guide for connector locations.
1. Connect the power cables to the server board.
•
The large plug labeled P1 plugs into the main power connector on the server board
•
The plug labeled P2 plugs into the +12V CPU Power connector on the server board
2. Connect the front panel cable to the server board.
3. Connect the USB cable to the server board.
4. Connect the fan cables to the server board.
5. Connect the IDE cable(s) to the server board. Cable provided with server board.
6. Connect the floppy cable to the server board. Cable provided with server board.
7. Connect the chassis intrusion cable to the server board.
8. If desired, connect the serial port cable to the server board and mount it on the rear of the
chassis.
NOTE
Use caution in routing cables to ensure they do not obstruct the airflow from
the fans.
Intel® Entry Server Chassis SC5275-E User Guide 23