Table of Contents
Advertisement
2
Setting Up the Chassis
Install the I/O Shield
NOTE
An ATX 2.03-compliant I/O shield should be provided with your server
board. The shield is required by Electromagnetic Interference (EMI)
regulations. It minimizes EMI and ensures proper cooling of the server.
The shield fits the rectangular opening near the power supply in the back of the chassis. The shield
has cutouts that match the external I/O connectors (e.g., keyboard and mouse).
1. If an EMI gasket was provided with your server board, install it now.
2. Install the shield from the inside of the chassis. Orient the shield so that the cutouts align with
the corresponding I/O connectors on the server board.
3. Position one edge of the shield so that the dotted groove is outside the chassis wall and the lip
of the shield rests on the inner chassis wall.
4. Hold the shield in place, and push it firmly into the opening until it is seated. Make sure the
I/O shield snaps into place all the way around.
Intel® Entry Server Chassis SC5275-E User Guide
Figure 5. Installing the I/O Shield
TP00074
13
Advertisement
Table of Contents
